특화 제품군

– 2WAY 직동식 _ 파일롯 타입 평시 닫힘형 솔레노이드 밸브

Liquid nitrogen (-320˚F/-194˚C), Liquid argon (-303˚F/-184˚C), Liquid oxygen (-297˚F/-181˚C)
Body: Cryogenic Valves Brass
초저온 유체 ON/OFF 제어
Port Size : NPT 1/8 ” ~ 1-1/2 ”
Class of Insulation : AC F Class _ DC H Class

– 2 WAY _ 3 WAY BALL VALVE

Temperatures 400˚F (205˚C) to -320˚F (-200˚C)
CL300 CL600 Welded Threaded End Flanged End TYPE
MANUAL TYPE _ ACTUATOR TYPE
Size 1/2 ” ~ 4 ”

2/2 way _ 3/2 way _ 5/2 way 방폭 솔레노이드 밸브

Port Size : 1/4″ ~ 1/2″
국내 방폭 인증 코일 적용
Pilot operated, spool type single/dual solenoid valve
Direct operated solenoid valve
II 2G/D Ex d IIC T6..T4 Gb / Ex tb IIIC Db IP66/IP67

피스톤 파이롯트 킥 타입-직동식
몸체재질 : 황동 _ 스테인리스 스틸 몸체
방폭등급 : Exd mb IIC T4 IP67
2/2 way 평시 닫힘형 _ 열림형 TYPE
FLUID TEMPERATURE : 0 ~ 180°C
PRESSURE RANGE : 0 ~ 7 BAR
PORT SIZE : PT 1/2 ” ~ 2″ (나사형 _ 플랜지형)
INSULATION GRADE : CLASS H
OPTION : 밸브 취부 L형 브라켓 장착 가능
SEMICONDUCTOR CHIILER (DISCHARGE/CHECK용)

BOX TYPE LIMIT SWITCH (국내방폭인증 KTL )

HOUSING MAT’L : Aluminum with protective paint finish
ENCLOSURE : 내압방폭 기준표기 ( Ex d IIC T6 )
ENCLOSURE : 분진방폭 기준표기 (Ex tb IIIC T85℃ )

LEVER TYPE LIMIT SWITCH (국내방폭인증 KOSHA )

HOUSING MAT’L : ALUMINIUM
ENCLOSURE : 내압방폭 기준표기 ( Ex d IIC T6 )
ENCLOSURE : 분진방폭 기준표기 (Ex tD A21 IP6X T85℃ )

전기식 초고압 비례제어 레귤레이터 – MAX 700 BAR

전기 신호에 비례하여 공기압력을 무단계로 제어
Proportional valve for harmless* gases
Outlet pressure range up to 10150 psi (700 bar)
Connections G 1/4
Flow volume max. 600 Nl/min
Made of brass
Seals depending on medium (standard NBR)
Analog or digital control
카다록자료-Outlet pressure range up to 100 bar

Fluids: Air or neutral gases
Pressure Ranges: 0–50 psi, 0-100 psi, 0-150 psi, 0-3 bar, 0-6 bar, 0-10 bar
Digital communication and control
Port Sizes: 1/8,~ 1 (NPT or GTap)
Temperature Range (Ambient): 32°F – 140°F (0°C – 60°C)

의료 장비 및 분석 장비의 유량을 정밀하게 제어하는 ​​데 이상적입니다.
컴팩트 한 구조로 장비의 공간 절약을 구현합니다.
밸브는 최소 작동 압력을 필요로하지 않습니다.
낮은 히스테리시스, 우수한 반복성 및 정밀한 유량 제어를 위한 높은 감도를 유지합니다.

– Smart positioner CMSH with HART communication

HART communication
2-conductor technology
High air output
Low internal air consumption
Ambient temperature −40 … +80 °C
Fail safe or fail in place
Optional connection for external position sensor
Perfect teamwork with the pneumatic extension modules VTOP

– Quarter turn Actuators

Type : Double-Acting _ Single-Acting
회전 각도: 0 – 90°, 0 – 180°
토크: 10 – 2300 Nm
ISO 5211에 따른 플랜지 홀 패턴
솔레노이드 밸브/센서 박스 연결 표준 VDI/VDE 3845에 따른 NAMUR 연결 패턴

2WAY 피스톤 파이롯트식 상시 닫힘형
사용압력 최대 200 BAR ( 최소 필요 차압 5 BAR )
적용온도 최대 100도
사이즈 1/4″~ 3/4″ 적용
배관형식 (스크류)

사용압력 최대 40BAR (1/2″~1-1/2″PT)
적용온도 최대 230도
사이즈 1/2″~2-1/2″ 적용
배관형식 (스크류 , 플랜지 , 용접사양)
형식 – ON/OFF _ 모터밸브 _ 비례제어

Sizes : 1/2” – 2” Up to ANSI Class 2500 (CL 1500 standard)
End Connections : Thread Pipe, Buttweld, Socket Weld, Compression, Instrument Adapter Flange
Temperatures : From 350˚F to 800˚F depending on material & Ambient to 800˚F depending on material
Material : 316 Stainless Steel, Hastelloys Duplex SS, Carbon Steels, Monel
MANUAL TYPE & ACTUATOR TYPE

Analytical Technologies
Medical Technologies
Isolation Valves
Pinch Valves
General Service Valves
Proportional Valves
Engineered Solutions

• 316L Stainless steel body material
(316L Single and double melting stainless steel materials available)
• Ni-Co alloy material diaphragm for strength and corrosion resistance
• Fully contained seat design minimizes particle generation
• Maximize flow capacity & minimize entrapment areas
• Optimal design for long cycle life
• Manual and pneumatic actuator
• All Valves are factory tested with helium.

• Bolted Extended Bonnet Design.
• Low Emission Design.
• Cavity Pressure Relief.
• Spring loaded packing Design.
• Fire Safe Design & Anti static Design.
• Flow direction & Position Indicate.
• Stainless Steel Lever or Hand Wheel.
• Available Double Block & Bleed Valves.
• Pressure rating up to Class 1500.
• Temperature rating Down to -196’C (-327°F).
• Variety of End connections.

– Pressure rating up to 3600psig (248bar) at 21°C (70°F).
-Temperature rating from -54°C (-65°F) to 648°C (1200°F) with Graphite packing.
– Valve stem back seating against the bevelled edge of bonnet in fully open
position prevents maximum leakage through bonnet when packing fails.
– Packing Bolt allows external packing adjustment.
– Packing under the stem threads is to isolate threads from system fluid and lubricant washout.
– Variety of end connections include reliable S-LOK tube fittings, male/female NPT & ISO threads.
– The hard faced seat ring and wedge enable longer life cycle & Low operating torques.
– Available Sour Gas service per NACE MR0175.